pelat jangkar kupu-kupu
pelat jangkar pertambangan
pelat jangkar baut batu
pelat jangkar kupu-kupu
pelat jangkar pertambangan
pelat jangkar baut batu

Plat Jangkar Kupu-kupu untuk Penopang Baut Batuan | Aksesoris Jangkar Pertambangan & Terowongan

Pelat jangkar kupu-kupu baut batuan adalah alat pengikat tambahan untuk baut batuan dan struktur penyangga. Alat ini banyak digunakan dalam penyangga tambang, penyangga terowongan, jangkar jembatan, penyangga lereng, dan proyek penyangga bawah tanah lainnya.
Pelat jangkar kupu-kupu terbuat dari besi cor atau baja berkekuatan tinggi dengan daya dukung besar dan efek fiksasi yang andal. Pelat ini dapat menopang berbagai baut jangkar dengan stabil. Pelat jangkar kupu-kupu memiliki desain pengunci. Saat memasang baut jangkar, pelat ini mengunci baut jangkar untuk mencegah pergerakan.
  • Untuk memasang baut batuan dan baut jangkar.
  • Pelat penyangga jangkar tipe kupu-kupu untuk penjangkaran yang stabil.
  • Diproduksi menggunakan besi cor atau baja berkekuatan tinggi.
  • Kapasitas daya dukung beban tinggi sebesar 100 kN hingga 520 kN.
  • Tahan korosi dan tahan aus.
  • Digunakan dalam industri pertambangan, konstruksi terowongan, jembatan, dan konstruksi bangunan.
  • Mudah dipasang, dilepas, dan dirawat.
  • Ukuran khusus tersedia untuk berbagai sistem penyangga baut batuan/baut jangkar.
Deskripsi Produk

1. Spesifikasi Produk

 

Ukuran Kapasitas Muat
120 x 120 x 5 mm ≥100 kN
120 x 120 x 6 mm ≥115 kN
120 x 120 x 8 mm ≥130 kN
150 x 150 x 5 mm ≥135 kN
150 x 150 x 6 mm ≥170 kN
150 x 150 x 8 mm ≥230 kN
150 x 150 x 10 mm ≥290 kN
120 x 120 x 10 mm ≥260 kN
200 x 200 x 10 mm ≥360 kN
200 x 200 x 12 mm ≥420 kN
250 x 250 x 8 mm ≥320 kN
205 x 250 x 10 mm ≥400 kN
250 x 250 x 12 mm ≥440 kN
300 x 300 x 10 mm ≥420 kN
300 x 300 x 12 mm ≥480 kN
300 x 300 x 14 mm ≥520 kN

 

 

2. Aplikasi

Digunakan dalam aplikasi berikut:
* Penopang atap tambang.
* Penopang terowongan.
* Dukungan dan penguatan baut batuan.
* Dukungan konstruksi jembatan.
* Penguatan lereng.
* Dukungan teknik bawah tanah.
* Penopang dinding penahan.
* Dukungan dan penahan konstruksi.

 

 

3. Mengapa Memilih Pelat Jangkar Kupu-Kupu Ini?

 

 

4. Pertanyaan yang Sering Diajukan (FAQ)


T:Bahan apa saja yang tersedia?

T: Berapa kisaran kapasitas muat yang tersedia?

T: Apakah ukurannya bisa disesuaikan?
A:Kustomisasi biasanya tersedia. 

T: Apakah ini cocok untuk konstruksi terowongan?
A:Ya. 

 

Batang jangkar berongga 1
Batang jangkar berongga 2
ikon Berita Terkait ikon

Berita Terkait

Rock Bolt Bearing Plate Purchasing and Assembly Fit

Specify rock bolt bearing plates by verifying bolt and washer fit, hole dimensions, material and finish, load evidence, drawing revision, and assembly checks.
Baca selengkapnya

Squeezing Ground Support Strategies for Weak Rock Masses

When using squeeze support techniques they differ from normal rock bolting practices due to the rock surrounding your excavation will most likely still deform after you have excavated. If you have a weak rock mass with enough stress applied to it. Tunnels and roadways can become subject to large amounts of convergence. Shotcrete cracks and failure of reinforcement can also occur. The excavation will begin to lose width and height.
Using larger or higher capacity rock bolts or stiffer lining's will not solve this problem.
Proper support needs to be designed to accommodate these rock masses and their ability to deform. Based on the situation you can use different types of support such as. Yielding reinforcement, steel supports that can deform. Shotcrete that can be engineered to yield and support being placed at different stages during excavation. As well as monitoring of the deformation.
You want to allow some movement but be able to keep the excavation safe and workable.
Below are some concepts and types of support used when dealing with squeeze and weak rock masses in underground applications.
Baca selengkapnya

Using RMR and the Q-System to Select Ground Support

There are many rock mass classification systems used in underground excavations. Some of these systems can be used to give you a general idea on what supports may be required for your excavation. The RMR and Q-system will allow you to assess the rock mass around you and translate that into numbers and information. They can not provide you with a complete support design for your site however.
When working in underground environments you need to have an understanding on what supports may be used in an excavation. Rock bolts, cable bolts, wire mesh, shotcrete and support are all used to keep your excavation standing.
Using RMR you are given a number and information to go off of to help you design supports for your site. The Q-system will give you more information to go off of as it is made up of different categories and can provide support information for your excavation.
Baca selengkapnya

Ground Support Design: Matching the System to Rock Mass Conditions

Design of ground support should always start from what rock mass you have in front of you. It should never be based on one rock bolts ability to support ground. There are many types of rock mass that will require different support systems. From competent jointed rock, very broken rock mass, squeezing ground and even rockburst ground.
When designing ground support you want to make sure your system can withstand what type of failure you may encounter. Shape of opening, stresses present at the site, ground water and time the support needs to last.
Classifying your rock mass with systems such as RMR, Q and GSI will allow you to determine how good your ground is. These classification systems should be used along side further analysis and checked at site.
Below we will go into detail about matching rock bolts, cable bolts, self drilling anchors, mesh and shotcrete to your ground conditions.
Baca selengkapnya

Mining Bearing Plate Types: Flat, Domed, and Butterfly Plates Compared

Mining Bearing Plate Types: Flat, Domed, and Butterfly Plates Compared
Baca selengkapnya

Galvanized vs Bare vs Epoxy-Coated Bolts: Choosing by Design Life

Corrosion protection for rock bolts needs to be taken into account when using them in an underground environment. There are many different factors to consider when deciding whether to use bare steel rock bolts, hot-dip galvanized rock bolts or epoxy coated rock bolts.
Design life, water table and corrosive environment. How will the anchor be installed? Will it be damaged during installation? What inspections will need to be performed. All these will play a role in determining the right corrosion protection to use on your rock bolt.
Bare steel rock bolts can be used on temporary excavations if corrosion is not expected and allowed by the engineer designing the project. Hot-dip galvanized rock bolts have zinc coating which can increase the life of your rock bolt in certain environments. Epoxy coated rock bolts are another option they just depend on what the coating will come into contact with and if there's any damage during install.
As long as you choose the correct corrosion protection for your design life your fine.
Below we will cover all three types of rock bolts and what to consider when buying rock bolts for underground applications.
Baca selengkapnya
ikon melayani ikon
Layanan terkait
layananlcon 1

Solusi Dukungan Darat Terpadu

Kami memberikan dukungan lengkap untuk aplikasi penguatan bawah tanah, meliputi: Sistem penyangga atap dan dinding samping tambang Solusi penguatan terowongan Dukungan teknik stabilisasi lereng Sistem penjangkaran pondasi Sistem struktur keselamatan bawah tanah Mulai dari perencanaan proyek tahap awal hingga penerapan di lokasi, kami membantu pelanggan membangun lingkungan bawah tanah yang lebih aman dan stabil.

layanan lcon 3

Pasokan Produk & Integrasi Sistem

Wanfeng menyediakan sistem pasokan produk yang terintegrasi penuh, memungkinkan pelanggan untuk mendapatkan semua material pendukung darat dari satu pemasok: Sistem baut batuan (resin / FRP / berulir) Baut kabel & sistem jangkar Lengkungan baja & sistem penyangga baja I Jaring kawat dan jaring penguat Pelat, mur, baut & komponen pengikat Bahan jangkar resin & semen Peralatan pertambangan & aksesori habis pakai Kemampuan pasokan satu atap kami mengurangi kompleksitas pengadaan dan meningkatkan efisiensi proyek.

layanan lcon 4

Layanan Manufaktur & Jaminan Mutu

Kami memastikan kinerja produk yang stabil dan andal melalui sistem manufaktur dan kontrol kualitas yang ketat: Proses produksi yang terstandarisasi Inspeksi dan pengendalian bahan baku Pengujian kinerja mekanis Verifikasi daya dukung beban dan kekuatan tarik. Inspeksi konsistensi batch Inspeksi kualitas akhir sebelum pengiriman Setiap produk dirancang untuk memenuhi persyaratan keselamatan bawah tanah yang ketat.

layanan lcon 5

Layanan Rekayasa Kustom & OEM

Kami juga mendukung solusi khusus untuk berbagai proyek pertambangan dan teknik: Spesifikasi baut batuan yang disesuaikan Desain penyangga baja non-standar Struktur jaring dan penguat khusus Konfigurasi produk berbasis proyek Kerjasama OEM / private label Kami bekerja sama erat dengan mitra global untuk mengembangkan solusi yang disesuaikan untuk lingkungan bawah tanah yang kompleks.

layanan lcon 6

Dukungan Pasokan & Logistik Global

Dengan pengalaman ekspor yang kuat, kami menyediakan pengiriman global dan dukungan rantai pasokan yang efisien: Standar pengemasan ekspor internasional Optimalisasi pemuatan kontainer Dukungan pengiriman multi-wilayah Penjadwalan produksi cepat untuk proyek-proyek mendesak. Perjanjian pasokan jangka panjang yang stabil Kami memastikan pengiriman yang andal ke proyek-proyek pertambangan di berbagai negara dan wilayah.

layanan lcon 7

Layanan Purna Jual & Dukungan Jangka Panjang

Kami mendukung pelanggan di seluruh siklus proyek: Dukungan dokumentasi teknis Bantuan panduan instalasi Dukungan penggantian produk Kontinuitas pasokan jangka panjang Konsultasi teknik untuk perluasan proyek. Tujuan kami adalah membangun kemitraan jangka panjang, bukan hanya transaksi tunggal.

ikon Pesan ikon

Hubungi kami

    Produk
    Kontak
    WhatsApp
    E-mail